59106 Time between addr assignment to RENEWING state
59107 Rebinding (T2) Time Value
59108 Time from addr assignment to REBINDING state
59109 NIS+ Domain Name
59110 The name of the client's NIS+ domain.
59111 NIS+ Servers
59112 A list of IP addresses indicating NIS+ servers.
59113 Enable NBT hostname resolution
59114 0==off 1==on
59115 Enable gethostbyname() WINS resolution
59116 0==off 1==on
59117 Hostname resolution order
59118 0==hosts,1==dns,2==hosts->dns,3==dns->hosts
59119 Domain suffix search order
59120 List of domain suffixes in order (6 max)
59121 Enable WINS proxy agent
59122 0==off 1==on
59123 Boot Server Host Name
59124 TFTP boot server host name
59125 Bootfile Name
59126 Bootfile Name
59127 Mobile IP Home Agents
59128 Mobile IP home agents in priority order
59393 Show or hide the status bar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close DHCP Manager and save the settings
61202 Restore the window to normal size
61203 Activate Task List
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61588 Linked %s
61589 Unknown Type
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61829 %1\nUnable to register document.\nThe document may already be open.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
61877 %1 has a bad format.
61878 %1 contained an unexpected object.
61879 %1 contains an incorrect schema.
61888 pixels
62000 This is a dummy message used as an anchor for the error messages
62001 Insufficient memory available to perform requested operation.
62002 Invalid server/host name.
62003 The named server/host has already been added to the list of DHCP servers.
62004 The given functionality is not currently supported.
62005 The scope specified is already being accessed
62006 The identifier of an option type cannot be changed.
62007 The given option identifier is already in use.
62008 Starting address is invalid for this range
62009 Ending address is invalid for this range.
62010 Internal error in updating the dialog
62011 The IP address range overlaps a current defined range.
62012 The IP address range is not a subset of the overall range.
62013 The IP address range given is invalid.
62014 Nothing has changed on the dialog.
62015 Dialog information was changed. Do you want to keep the changes?
62016 No primary server/host has been selected.
62017 An internal application error has occured.
62018 Option value data structure is invalid
62019 The name of the scope must be specified.
62020 A comment must be provided for the scope.
62021 The option name is required.
62022 Binary data editing not yet supported
62023 Array editing is not yet supported
62024 Numeric data is invalid.
62025 The subnet mask is not valid.
62026 The option was not found for deletion.
62027 System error %ld occurred
62028 The date given is invalid.
62029 Unique Client Identifier string is invalid.
62030 The client name is invalid.
62031 The client IP address is invalid.
62032 The client IP address of an existing client cannot be changed.
63000 This is a dummy entry corresponding to the first DHCPDLL.DLL error message
63001 Unable to connect to the host/server name given
63002 There is no current connection to the host/server
63003 The given IP address is invalid
63004 Information for this host is unavailable
63005 This scope has an internal data conflict error.
63007 NetBIOS Names are not valid here. Try using a DNS name or IP address.
63008 Are you sure you want to delete the scope?
63009 \nUnable to connect to DHCP server at %s.\nServer may be down, or DHCP service not started.\n\nDo you want to remove it from the list of DHCP servers?
63010 Are you sure you want to remove %s from the list of DHCP servers?
63011 The scope has already been deleted by another process.
63012 Warning: In order for WINS to function properly, you must now set option 46(WINS/NBT Node Type), and set it to either 0x02(P-Node), 0x04(M-Node) or 0x08(H-Node).
63013 The DHCP server service is not running on the target machine.
63014 Value out of range.
63015 You must specify a lease duration
63016 The IP range has been changed, but not yet saved. Continuing will discard the changes. Proceed?
63017 The option ID must be between 0 and 255.
63018 This scope may have active clients. Delete scope anyway?
63019 Unable to determine number of available leases.
63020 This scope is currently active. Are you sure you want to delete the scope?
63021 Are you sure you want to delete the lease?
63022 This function is not supported on the DHCP server you are administering. You must upgrade this DHCP server's software to complete this function.
